鋼筋網片由線材制成,經拉伸和退火成為低碳黑色鋼絲,然后用線材矯直機切開經緯線的標準,然后焊接在核算機上-可控自動焊網機。焊接網的焊接程序由核算機自動操控。焊接質量出色,焊接前后鋼筋的力學性能底子不變。
The steel mesh is made of high-quality wire rod, which is drawn and annealed into low-carbon black steel wire. Then the wire rod straightener is used to cut the standard of warp and weft lines, and then welded on the accounting machine - controllable automatic mesh welding machine. The welding procedure of the welding net is automatically controlled by the accounting machine. The welding quality is excellent, and the mechanical properties of the reinforcement before and after welding remain unchanged.
焊網網布均勻,可焊接,網面光滑,耐腐蝕,保護性強,便宜,質量***。鋼筋網片跟著焊接技術的前進出產工藝也越來越老到。跟著技術立異的腳步,我廠在絲網和電焊網的基礎上完善了鐵絲網片的焊接技術。鐵絲網片從護欄網的初始焊接次第逐漸接觸到小孔經線的技術類型。
The welding mesh is uniform, weldable, smooth, corrosion-resistant, protective, cheap and of high quality. With the development of welding technology, the production technology of steel mesh is getting more and more old. With the pace of technological innovation, our factory has improved the welding technology of wire mesh on the basis of wire mesh and electric welding mesh. The wire mesh gradually comes into contact with the small hole warp from the initial welding of the fence.
焊接網,小口徑焊網一般在2-4毫米線徑之間,網孔在2厘米到4厘米之間用于小孔徑焊接網,其焊接難度在于網孔表面不規則。對角線過失很大。
Welding mesh, small-diameter welding mesh is generally between 2-4mm wire diameter, mesh between 2cm and 4cm is used for small-diameter welding mesh, the difficulty of welding lies in the irregular mesh surface. The diagonal is a big fault.
鋼筋網片在實踐出產過程中擬定了一套定位梳棒的出產技術。它不只處理了大對角線過失和網面不均勻的技術問題。走在小孔焊接網前面,為客戶節省30百分之的加工時間。它還為我們的工廠帶來了一系列經濟收入。小孔焊網技術嫻熟。焊接不銹鋼網--小孔不銹鋼網也出產,線徑更小1.7毫米,網格1毫米標準不銹鋼焊接網。
In practice, a set of production technology of positioning comb bar has been worked out. It not only deals with the technical problems of large diagonal fault and uneven mesh surface. Walk in front of the small hole welded mesh, saving 30% of the processing time for customers. It also brings a series of economic income to our factory. Skilled in keyhole mesh welding. Welded stainless steel mesh - small hole stainless steel mesh is also produced, with a minimum wire diameter of 1.7 mm and a mesh of 1 mm. International standard stainless steel welded mesh.
If you have the demand of Jinan Steel wholesale, you can click the official website for consultation: http://m.iheartcartagena.com/