It can bear the expansion better, shorten the deformation caused by the external natural conditions, and eliminate the deformation stress of temperature difference uniformly, so as to effectively avoid the occurrence of cracks. For example, the outer surface faces the brick, but the wire diameter and hole spacing of the wire mesh shall be determined experimentally, and the short side facing the brick shall be at least two holes. Galvanised steel mesh against corrosion (rust) shall be suitable for screening.

　　單網結構和傳統水泥砂漿找平用鋼面線框聚苯乙烯板外保溫系統具有很大的不合理性（大載荷，容易開裂），并且外部受到正負風壓，熱脹冷縮，收縮和潮濕應該使用膨脹，小而輕的砂漿和短的起酥率來制造飛機，并使用雙重網絡結構來結束活動過程。進行更改以減少負載并增加抗裂性。

　　Single net structure and traditional steel wire frame polystyrene board external insulation system for cement mortar leveling have great irrationality (large load, easy to crack), and the external is subject to positive and negative wind pressure, thermal expansion and contraction, shrinkage and humidity should use expansion, small and light mortar and short crisp rate to manufacture aircraft, and use double network structure to end the activity process. Make changes to reduce load and increase crack resistance.

　　旅行隔離系統的質量控制標準。由于原始數據，采樣檢查的差異以及施工條件等諸多混亂因素的影響，有必要對墻體的保溫質量進行測試。為了墻體的保溫質量，提高了保溫系統的質量控制速度。在正常的生產和構造條件下進行數學計算。選擇一種方法來找到多個隔熱數據集的傳熱系數的相同值和標準偏差。

　　Quality control standard of travel isolation system. It is necessary to test the insulation quality of the wall due to the original data, the difference of sampling and inspection, the construction conditions and many other chaotic factors. In order to improve the quality of wall insulation, the quality control speed of the insulation system is improved. Carry out mathematical calculation under normal production and construction conditions. Select a method to find the same value and standard deviation of heat transfer coefficient of multiple heat insulation data sets.